Here we will discuss, What is an Optical Fiber, the Construction of the Optical Fiber and Working principle of the Optical Fiber. A complete video lecture has also been included to clear the concepts in a better way.
So let's start with the definition of Optical Fiber-
So let's start with the definition of Optical Fiber-
What is an Optical Fiber?
An optical fiber is a flexible and transparent fiber, made by drawing glass (silica) or plastic to a diameter slightly more than that of a human hair (including outer coating, its diameter is 0.25 mm-0.5 mm).Optical Fiber Construction and Working Principle Video [HD]
The light rays propagate inside the optical fiber by the phenomenon of Total Internal Reflection (TIR). Now we will know the basic principle of operation of the optical fiber.
Working Principle of Optical Fiber
Total Internal Reflection in Optical Fiber (TIR)
The optical fiber has a core and a cladding layer. The refractive index of the core is more than the refractive index of the cladding. So when the light rays move from denser medium to rarer medium (core to cladding) with an incidence angle greater than the critical angle (90 degrees), the total internal reflection phenomenon takes place and the light rays return back into the same denser medium (core). So the propagation of light rays take place inside the core of the Optical Fiber with successive Total Internal Reflection (TIR).
To understand, how this phenomenon of total internal reflection takes place inside the optical fiber when the light rays propagate through it, see the image given below
(Click on the image to enlarge it)-
 |
| Total Internal Reflection (TIR) |
The image above shows, 3 different cases of refraction of light, when the light ray propagates from denser medium to the rarer medium.
🌓READ THIS ALSO:-
#STEP INDEX OPTICAL FIBER (MULTIMODE AND SINGLE MODE STEP INDEX FIBERS)
#OPTICAL FIBERS IN COMMUNICATION: COVERS ALL IMPORTANT POINTS
Therefore the angle of refraction is more than the angle of incidence when the light rays move from denser medium to rarer medium.
Now look at the image, here you can see that, in the first case, when the incidence angle is less than the critical angle (the incidence angle, when the angle of refraction is 90° degrees), the light ray moves away from the normal in the rarer medium and goes into the rarer medium.
The second case shows the case of critical angle. Critical angle is the angle of incidence, when angle of refraction is 90 degrees (when the light ray moves from denser tor rare medium).
Now see the third case, it is the case where total internal reflection takes place. This is the same case that happens inside the optical fibre, when the light rays propagate through it.
In this third case, when the light ray moves from denser to rarer medium, with an angle of incidence more than the critical angle, it returns back into the same denser medium. This is called as total internal reflection.
🌓READ THIS ALSO:-
#ADVANTAGES OF OPTICAL FIBER COMMUNICATION
#OPTICAL FIBER SOURCES (DESIRABLE PROPERTIES)
This phenomena is known as total internal reflection, because in this phenomena, the light ray is reflected totally back into the same medium like reflection phenomena.
Construction and Working of the Optical Fiber
Now we will see how this phenomenon of total internal reflection takes place inside the optical fiber. To understand the concept clearly look at the image shown below (Click on the image to enlarge it)- |
| Propagation of light inside optical fiber with Total Internal Reflection (TIR) |
This image shows the structure and working principle of the optical Fibre. You can see in this image the two layers of the Optical Fiber, known as Core and cladding.
🌓READ THIS ALSO:-
#Single-Mode Optical Fiber Advantages
Now observe the image carefully. When the light ray moves inside the core and reaches to the core- cladding interface, then the phenomenon of total internal reflection takes place. This phenomena is seen here because, the light ray moves from the denser medium to the rarer medium (core to cladding).
But for the total internal reflection to take place, it is necessary that the angle of incidence must be more than the critical angle. Only the incident light rays for which the angle of incidence is more than the critical angle, can propagate through the core of the fiber with total internal reflection. The light ray moves through the core of the fiber, with total internal reflection taking place each time when the light ray reaches at the core-cladding interface.🌓READ THIS ALSO:-
#Single-Mode Optical Fiber Advantages
Now observe the image carefully. When the light ray moves inside the core and reaches to the core- cladding interface, then the phenomenon of total internal reflection takes place. This phenomena is seen here because, the light ray moves from the denser medium to the rarer medium (core to cladding).
For the light rays that enter into the Optical Fiber with an angle of incidence lesser than the critical angle; the phenomenon of total internal reflection doesn't take place, and these light rays move into the cladding instead of returning back into the same denser medium (core).
So, we can see that for the light rays to travel through the Optical Fiber, it is necessary that the light rays must have the angle of incidence more than the critical angle at the core-cladding interface, for the total internal reflection to take place.
Read More-
Go To HOME Page
FREQUENCY SPECTRUM OF AMPLITUDE MODULATION (WAVEFORMS AND EQUATIONS DERIVATION)
AMPLITUDE MODULATION (TIME DOMAIN EQUATIONS AND WAVEFORMS)
ADVANTAGES AND DISADVANTAGES OF DIGITAL COMMUNICATION SYSTEM
ADVANTAGES OF OPTICAL FIBER COMMUNICATION
STEP INDEX OPTICAL FIBER (MULTIMODE AND SINGLE MODE STEP INDEX FIBERS)
PULSE MODULATION TECHNIQUES (PAM, PWM, PPM, PCM)
OPTICAL FIBER: STRUCTURE AND WORKING PRINCIPLE
PULSE AMPLITUDE MODULATION (PAM)
COMPARISON OF PAM, PWM, PPM MODULATION TECHNIQUES
PULSE WIDTH MODULATION (PWM)
CONTINUOUS TIME AND DISCRETE TIME SIGNALS (C.T. AND D.T. SIGNALS)
NEED AND BENEFITS OF MODULATION
PULSE POSITION MODULATION (PPM)
OPTICAL FIBERS IN COMMUNICATION: COVERS ALL IMPORTANT POINTS
OPTICAL FIBER SOURCES (DESIRABLE PROPERTIES)
AMPLITUDE MODULATION Vs FREQUENCY MODULATION (ADVANTAGES AND DISADVANTAGES)
PULSE CODE MODULATION (PCM) [ADVANTAGES AND DISADVANTAGES]
SAMPLING THEOREM AND RECONSTRUCTION (SAMPLING AND QUANTIZATION)
SUPERPOSITION THEOREM (BASICS, SOLVED PROBLEMS, APPLICATIONS AND LIMITATIONS)
Digital Modulation Techniques (ASK, FSK, PSK, BPSK)/ Amplitude, Frequency and Phase Shift Keying
Conventional AM Vs DSB-SC Vs SSB-SC Vs VSB (Comparison of AM Systems)
Quadrature Amplitude Modulation (QAM)/ QAM Transmitter and QAM Receiver Block Diagram
Single-Mode Optical Fiber Advantages
What are Microwaves and their Applications (Uses) in various fields
Microwaves Properties and Advantages (Benefits)
Basic Structure of Bipolar Junction Transistor (BJT) - BJT Transistor - Working and Properties
Polar Plots of Transfer Functions in Control Systems (How to Draw Nyquist Plot Examples)
Generation of Binary Phase Shift Keying (BPSK Generation) - Block Diagram of Binary Phase Shift Keying (BPSK)
Low Level and High Level Modulation Block Diagram (AM Transmitter Block Diagram)
Block Diagram of CRO (Cathode Ray Oscilloscope), Components of CRO and CRT with Structure and Working
Slope Overload Distortion and Granular (Idle Noise), Quantization Noise in Delta Modulation
Frequency Translation/Frequency Mixing/Frequency Conversion/Heterodyning (Basic Concepts and Need)
Quadrature Phase Shift Keying Modulation (QPSK) Basics, Waveform and Benefits
Pulse Code Modulation (PCM) Vs Differential Pulse Code Modulation (DPCM)
