We have already discussed the communication system and also the basic building blocks of it with the help of block diagram of the electronic communication system.
Although we have talked about communication channels while describing the block diagram of communication system. But now we will discuss the communication channels in depth here.
Here we will see what we mean by communication channels and different types of communication channels.
So let's first understand what is a channel in the communication system-
1.Mobile Radio Channel
2'Telephone Channel
3.Optical Fibres
4.Satellite Communication
Channels can broadly be classified into following two types-
*Point to Point Channels
*Broadcast Channels
Point-to-Point Channels- Channels having one transmitter and one receiver.
Some examples of point to point channels are- Wirelines, microwave links and optical fibers etc.Although we have talked about communication channels while describing the block diagram of communication system. But now we will discuss the communication channels in depth here.
Here we will see what we mean by communication channels and different types of communication channels.
So let's first understand what is a channel in the communication system-
What is a Channel in Communication
A channel is a medium through which the message having some information travels from the transmitter to the receiver.Watch the Complete Video Here
Communication Channel Types-
We will discuss 4 types of communication channels here that are used nowadays-1.Mobile Radio Channel
2'Telephone Channel
3.Optical Fibres
4.Satellite Communication
Channels can broadly be classified into following two types-
*Point to Point Channels
*Broadcast Channels
Point-to-Point Channels- Channels having one transmitter and one receiver.
Broadcast Channels- These channels have one transmitter and multiple receivers.
Satellite communication is an example of Broadcast channel.
Now we will discuss various communication channels one by one-
1.Mobile Radio Channels
Mobile radio channels have made the mobility possible in the telecommunication networks. Mobile radio channels do not have any line of sight for communication. The radio propagation takes place mainly because of two phenomenons known as-*Scattering and
*Diffraction
The scattering takes place from the surfaces of buildings that are present in the surroundings.
These obstacles are also responsible for the diffraction of the signals.
Because of this scattering and diffraction the energy reaches to the receiving station via different paths which leads to different time delays. This problem is known as the multipath phenomena.
2.Telephone Channels
The telephone channels are used to establish an end to end communication link on a temporary basis. Switching mechanism is used in the telephone networks that is known as a circuit switching.In Telephone channel communication, the sender speaks into the microphone. The sound vibrations are converted into electrical signals that is to be transmitted through the wired channel.
At the receiving end these electrical signals are converted back into the sound signals.
The telephone channel can pass frequencies between 300 to 3100 Hz that covers all the frequencies that are present in the human speech.
3.Optical Fibers
An optical fiber is a flexible and transparent fibre, made by drawing glass (silica) or plastic to a diameter slightly more than that of a human hair (including outer coating, its diameter is 0.25 mm-0.5 mm).You can watch the complete video about optical fiber structure and working.
Watch The Complete Video Here [HD]
The light rays propagate inside the optical fiber by the phenomenon of Total Internal Reflection (TIR). Now we will know the basic principle of operation of the optical fiber.
Working Principle of Optical Fiber
*Total Internal Reflection (TIR)
The optical fibre has a core and a cladding layer. The refractive index of the core is more than the refractive index of the cladding. So when the light rays move from denser medium to rarer medium (core to cladding) with an incidence angle greater than the critical angle (90 degrees), the total internal reflection phenomenon takes place and the light rays return back into the same denser medium (core). So the propagation of light rays take place inside the core of the Optical Fibre with successive Total Internal Reflection (TIR).
To understand, how this phenomenon of total internal reflection takes place inside the optical fibre when the light rays propagate through it, see the image given below (Click on the image to enlarge it)-
 |
| Total Internal Reflection (TIR) |
The image above shows, 3 different cases of refraction of light, when the light ray propagates from denser medium to the rarer medium.
Therefore the angle of refraction is more than the angle of incidence when the light rays move from denser medium to rarer medium.
Now look at the image, here you can see that, in the first case, when the incidence angle is less than the critical angle (the incidence angle, when the angle of refraction is 90° degrees), the light ray moves away from the normal in the rarer medium and goes into the rarer medium.
The second case shows the case of critical angle. Critical angle is the angle of incidence, when angle of refraction is 90 degrees (when the light ray moves from denser tor rare medium).
Now see the third case, it is the case where total internal reflection takes place. This is the same case that happens inside the optical fibre, when the light rays propagate through it.
In this third case, when the light ray moves from denser to rarer medium, with an angle of incidence more than the critical angle, it returns back into the same denser medium. This is called as total internal reflection.
This phenomena is known as total internal reflection, because in this phenomena, the light ray is reflected totally back into the same medium like reflection phenomena.
*Structure and Working of the Optical Fiber
Now we will see how this phenomenon of total internal reflection takes place inside the optical fiber. To understand the concept clearly look at the image shown below (Click on the image to enlarge it)- |
| Propagation of light inside optical fiber with Total Internal Reflection (TIR) |
This image shows the structure and working principle of the optical Fibre. You can see in this image the two layers of the Optical Fiber, known as Core and cladding.
Now observe the image carefully. When the light ray moves inside the core and reaches to the core- cladding interface, then the phenomenon of total internal reflection takes place. This phenomena is seen here because, the light ray moves from the denser medium to the rarer medium (core to cladding).
But for the total internal reflection to take place, it is necessary that the angle of incidence must be more than the critical angle. Only the incident light rays for which the angle of incidence is more than the critical angle, can propagate through the core of the fiber with total internal reflection. The light ray moves through the core of the fiber, with total internal reflection taking place each time when the light ray reaches at the core-cladding interface.Now observe the image carefully. When the light ray moves inside the core and reaches to the core- cladding interface, then the phenomenon of total internal reflection takes place. This phenomena is seen here because, the light ray moves from the denser medium to the rarer medium (core to cladding).
For the light rays that enter into the Optical Fiber with an angle of incidence lesser than the critical angle; the phenomenon of total internal reflection doesn't take place, and these light rays move into the cladding instead of returning back into the same denser medium (core).
So, we can see that for the light rays to travel through the Optical Fiber, it is necessary that the light rays must have the angle of incidence more than the critical angle at the core-cladding interface, for the total internal reflection to take place.
*Advantages of Optical Fibres
Following are the main benefits of Optical Fibers-*Very large bandwidth (2x10^13 Hz)
*Negligible transmission losses (0.2 db/km)
*Small size and very lightweight
*Highly flexible
*Immune to Electromagnetic Interference (EMI)
*No risk of electric shock
4.Satellite Communication
Satellite communication can be used for Continental or Intercontinental communication. It can cover large areas and also the areas that are not easy to access using other conventional modes of communication like wired communication or optical fibers.The communication satellites are situated in the Geostationary Orbit, at an altitude of 22300 miles above the Earth.
These satellites are placed directly above the equator on eastward heading.
We call these orbits as geostationary because the satellite that is placed in the geostationary orbit appears stationary from the Earth as it completes one revolution around the earth in exactly 24 hours. And we know that the earth completes one rotation about its axis in 24 hours. Therefore the satellites placed in geostationary orbit appear stationery (fixed) from the Earth.
The Image given below illustrates the satellite communication system-
 |
| Satellite Communication |
You can easily understand the basic principle of satellite communication with the help of this diagram.
The diagram shows two earth stations and a satellite.
One Earth station here is a transmitter while another earth station is receiving station. The transmitting earth station wants to send some information to the receiving earth station which is located at a large distance from it.
In satellite communication system the information is not directly transmitted from the transmitter to the receiver, instead it is first sent to the satellite and then the satellite sends this message signal to the receiving earth station.
Therefore when the transmitting earth station has to send some message to the receiving earth station, it first sends the message signal to the satellite.
As there is a large distance between the station and the satellite, the signals get weak. So the amplification of the signals takes place in the satellite when it receives it. Not only the amplification but also the frequency of the message signal is also modified as per the requirements. After these changes, the satellite sends the message signal back to the earth to the receiving earth station.
You can also observed in the diagram the RF up-link and RF down-link.
This was all about different kinds of communication channels. You can ask your queries, doubts or suggestions in the comments.
Read More-
Go To HOME Page
FREQUENCY SPECTRUM OF AMPLITUDE MODULATION (WAVEFORMS AND EQUATIONS DERIVATION)
AMPLITUDE MODULATION (TIME DOMAIN EQUATIONS AND WAVEFORMS)
ADVANTAGES AND DISADVANTAGES OF DIGITAL COMMUNICATION SYSTEM
ADVANTAGES OF OPTICAL FIBER COMMUNICATION
STEP INDEX OPTICAL FIBER (MULTIMODE AND SINGLE MODE STEP INDEX FIBERS)
PULSE MODULATION TECHNIQUES (PAM, PWM, PPM, PCM)
OPTICAL FIBER: STRUCTURE AND WORKING PRINCIPLE
PULSE AMPLITUDE MODULATION (PAM)
COMPARISON OF PAM, PWM, PPM MODULATION TECHNIQUES
PULSE WIDTH MODULATION (PWM)
CONTINUOUS TIME AND DISCRETE TIME SIGNALS (C.T. AND D.T. SIGNALS)
NEED AND BENEFITS OF MODULATION
PULSE POSITION MODULATION (PPM)
OPTICAL FIBERS IN COMMUNICATION: COVERS ALL IMPORTANT POINTS
OPTICAL FIBER SOURCES (DESIRABLE PROPERTIES)
AMPLITUDE MODULATION Vs FREQUENCY MODULATION (ADVANTAGES AND DISADVANTAGES)
PULSE CODE MODULATION (PCM) [ADVANTAGES AND DISADVANTAGES]
SAMPLING THEOREM AND RECONSTRUCTION (SAMPLING AND QUANTIZATION)
SUPERPOSITION THEOREM (BASICS, SOLVED PROBLEMS, APPLICATIONS AND LIMITATIONS)
Digital Modulation Techniques (ASK, FSK, PSK, BPSK)/ Amplitude, Frequency and Phase Shift Keying
Conventional AM Vs DSB-SC Vs SSB-SC Vs VSB (Comparison of AM Systems)
Quadrature Amplitude Modulation (QAM)/ QAM Transmitter and QAM Receiver Block Diagram
Single-Mode Optical Fiber Advantages
What are Microwaves and their Applications (Uses) in various fields
Microwaves Properties and Advantages (Benefits)
Basic Structure of Bipolar Junction Transistor (BJT) - BJT Transistor - Working and Properties
Polar Plots of Transfer Functions in Control Systems (How to Draw Nyquist Plot Examples)
Generation of Binary Phase Shift Keying (BPSK Generation) - Block Diagram of Binary Phase Shift Keying (BPSK)
Low Level and High Level Modulation Block Diagram (AM Transmitter Block Diagram)
Block Diagram of CRO (Cathode Ray Oscilloscope), Components of CRO and CRT with Structure and Working
Slope Overload Distortion and Granular (Idle Noise), Quantization Noise in Delta Modulation
Frequency Translation/Frequency Mixing/Frequency Conversion/Heterodyning (Basic Concepts and Need)
Quadrature Phase Shift Keying Modulation (QPSK) Basics, Waveform and Benefits
Pulse Code Modulation (PCM) Vs Differential Pulse Code Modulation (DPCM)
